Before customizing a drum conveyor, we first need to determine the parameters of the drum conveyor and the selection of the drum and its installation method. To ensure smooth transportation of goods, there must be at least three rollers in contact with the conveyed material at any time.

Before customizing a roller conveyor, we first need to determine the following parameters of the roller conveyor:

1. The length, width, and height of the conveyed object;

2. The weight of each conveying unit;

3. The bottom condition of the conveyed material;

4. Are there any special work environment requirements;

5. Conveyors are either non powered or motor-driven.

Selection of drum:

1. Length selection of drum: For goods of different widths, a drum suitable for the width should be selected, generally using "conveying material+50mm".

2. Wall thickness and shaft diameter selection of the drum: The weight of the conveyed material is evenly distributed to the contacting drums, and the required load-bearing capacity of each drum is calculated to determine the wall thickness and shaft diameter of the drum.

3. Roller material and surface treatment: Determine the material and surface treatment used for the roller according to the different conveying environments.

4. Choose the installation method of the drum: According to the specific requirements of the overall conveyor, choose the installation method of the drum: spring press in type, internal tooth shaft type, full flat tenon type, through shaft pin hole type, etc.

To ensure smooth transportation of goods, there must be at least three rollers in contact with the conveyed material at any time. When necessary, soft bag packaging should be transported on pallets.